Split this into three plates to try and reduce filament changes. Also have variable layer height on to try increase the quality/appearance along some of the edges.

I used a brown eSun PLA+ and Bambu black for this print. However, after this I printed a something in a Bambu Matte Latte Brown and black and the colors went together very well.

Building tips:

There is a slightly larger edge on one side of the spring, this should be placed in the head side. I ended up using some crazy glue to secure this side and let it dry.

After the glue dried, use a putty knife, screwdriver, or some sort of thin metal/plastic piece to help align/push the spring in on the body side.

I used a putty knife and it worked very well, but a spatula, screwdriver or even butter knife could work as well.