Here is another small project.
Very quick and easy to make. You don't need many "ingredients".
Materials I used:
- Translucent PETG Orange from Bambu Lab - colour code 32300
- PLA Basic Black from Bambu Lab - colour code 10101
- 2-core cable approx. 10cm
- White 6000K LED strip from Amazon
https://www.amazon.de/dp/B08S3QLW5M?psc=1&ref=ppx_yo2ov_dt_b_product_details
- Micro USB 3.1 type C plug from Amazon
https://www.amazon.de/dp/B0BGK46LVY?psc=1&ref=ppx_yo2ov_dt_b_product_details
Other accessories:
- Soldering iron
- solder
- Tweezers
- Double-sided adhesive tape
- Cutter knife
- scissors
First you print out the parts. Then you cut off a piece of the LED strip approx. 6cm and then a piece of cable approx. 10cm.
Now solder the cable to the USB C plug.
Then you should push the cable with the USB C plug through the guide and place it on the outside. See pictures
Shorten the cable to 1.5 cm as shown in the picture.
Now solder the LED strip to the cable (pay attention to the plus and minus pole)
Insert the LED strip with the cable into the guide and close the opening.
Connect to the power supply and you're done.
Have fun printing and building
I hope you understand that.
if you like my work/project consider supporting me with these options:
Easy to print easy to light up
TBG
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.