I rebuild the original hooks for the Fuxtec handcart CTXL900 (and possibly other handcarts) to provide a template for creating new and useful hooks.

The original hooks were used for mounting the seats. There are two different types of hooks: one is mounted on the side, and the other type is mounted on the back. The difference between these two types is the gap in the snap-fit mechanism. The hooks with 'sides' in their names have a larger gap and are easier to mount. Because of this, I recommend using the 'sides' hooks on the back as well.

The hooks with the 'original' designation can be used to replace a broken original one.

The hooks with the 'template' designation can be used to create new hooks.

Visit this link for an example of a newly created hook: https://www.printables.com/model/589875-fuxtec-folding-handcart-simple-hook-extension

Visit this link for the model page: https://cad.onshape.com/documents/d5ff1324370149c55a9b1130/v/97e9ea5b90b47d92db64ee8a/e/dd999c37abc364b20fc4cf1a?configuration=Hook_Inner_Diameter%3D0.01725%2Bmeter%3BList_bqYtvOsOcxaDXr%3DSides&renderMode=0&uiState=650d620f615ee301c64e9870

Print Settings:

• Layer Height: 0.24
• Wall Loops: 5 (get massiv part)
• Consider using an outer brim for better bed adhesion
• Recommended materials: ABS, ASA, or PETG (PLA is likely to break)

Please share your makes, remiex and experiences with this model.

This English text has been corrected by AI (OpenAI/ChatGPT).