Toilet paper holder with shelf
Boost
83
136
12
Print Profile(2)
0.12mm layer, 2 walls, 15% infill
Designer
16.4 h
2 plates
0.2mm layer, 3 walls, 10% infill
7.8 h
2 plates
Open in Bambu Studio
Boost
83
136
12
3
226
99
Released
Description
Toilet paper holder with shelf
Print for PLA
Comment & Rating (12)
All
Boosted
printed well, a little roughness in the backside corners but it’s pretty much hidden. It is sturdy, about 17 hours to print.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Print worked out very nice and had no big issues. Everything fits and works just as it should! :)
Thank you for sharing this model, it is appreciated.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
I love this. Perfect for my teenage girls
(Edited)
0
Reply
had problem with tube support, need lot more support for the tube, 0.12mm layer height is to small, too long to print but came good and fonctionnal, because i add maskin tape to hold the peace, be sure to add support to the base too. sharp angle
0
Reply
Boosted
Print Profile
0.12mm layer, 2 walls, 15% infill
1
Reply
how can i position the holes differently?
The designer has replied
0
Reply
For exaple is possible upload stl file to TinkerCad or Fushion360 and change the hole.
(Edited)1
Reply
Replying to @Mouras
yes it can be done in fusion 360 but you have to know a little about that program
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
good print
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
works great
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Works great! Shelf was a bit tight, so had to sand it down
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld