Cyber icharger by sipura

sipura

Tools>Gadgets

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

3.9 h

1 plate

5.0(6)

Boost

Released

Description

Hello,

Our new magsafe wireless charger and phone holder.

We wanted something different, and something that catches the eye even when you see the wireless charger from the back while it's on the table.

The holder fits the original Apple magsafe, we don't know about other models!

Also you need phone case with magsafe, or put phone without case.

Printed all with PLA, easy to assemble.

To assemble you need:

2 pcs M3x10mm screws

2 pcs threaded inserts M3x40

Keep in mind that you are printing according to the default settings, because the model is made to fit tight inside, and that you do not need to glue the magsafe to the stand.

Follow the assembly instructions as in the pictures below

Enjoy printing and using this magsafe wireless charger :D

Comment & Rating (16)

@DoubleT

Print Profile

0.16mm layer, 2 walls, 15% infill

beautiful design and printed very well

The designer has replied

@sipura

Thank you :) Looks nice with different patterns :)

(Edited)

@slinkdesign_

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed in 0.08mm Super fine. excellent quality!

The designer has replied

@sipura

Thank you. Feel free to put some pictures :D

@slinkdesign_

Replying to @sipura :

I have a question. The back plate where the magsafe charger sits isn’t deep enough to actually hold the charger in place. So when I place the front plate, the charger falls off. Is this normal or does the back plate need to be edited to have a deeper cutout for the charger to hold?

(Edited)

@sipura

on photo you can see my. We made it so if sou have a original apple magsafe it fit tight in, and that is it. never hat issues… but it can maybe be some difference between printers. try put doublesided tape if you have some clearance.

(Edited)

@POkrutny

Hi, Would you be able to remix the holder to make it compatible with the magsafe charger from Aukey? The charger from Aukey is a bit larger and it is not enough to make a reduction ring. :( Aukey Aircore 15W LC-A1 Diameter 59.75 mm Thickness 7.1 mm I would be much obliged, because the project is excellent!

The designer has replied

@sipura

Hi, thank you for suggestion. It isn't simple to make it because we dont have charger for accurate messurement. Normaly when we make something, we print it couple of times and try every fitment so we are sure that thing works fine, if you understand.

@twohlnbk

very nice

The designer has replied

@sipura

Thanks

@LordLaxez

Do you have an example threaded insert? All I can find on Amazon is M3x4x5

The designer has replied

@sipura

I bought these, but I see also now in description that they don’t have M3x40mm, that is the dimension what I messured home. Just found this amazing item on AliExpress. Check it out! €7.17 | M2 M2.5 M3 M4 M5 M6 Brass Heat Set Insert Nut Hot Melt Knurled Threaded Inserts for 3d Print Embedment Copper Nut Assortment Kit https://a.aliexpress.com/_EHkYaUf