3DominikPrint

cover

tempImageDk3jOY.jpg

tempImagesRMI7M.jpg

tempImagexJcVY7.jpg

tempImageaw9lw7.jpg

tempImageHEGh7z.jpg

tempImageZGmZaH.jpg

tempImage0mU4E7.jpg

20251011_204830.jpg

20251011_204834.jpg

20251011_204839.jpg

plate_1.png

2025-07-14_c7d0c88a4f51d8.jpg

0.2mm layer, 2 walls, 15% infill

Snímek obrazovky 2025-09-19 v 20.33.56.png

Snímek obrazovky 2025-09-19 v 20.33.38.png

5 color. There is STOP. Black, grey, brown, red-(stop)-green.

0.16mm layer, 2 walls, 15% infill

Snímek obrazovky 2025-10-07 v 7.10.34.png

Kmaster05

Screenshot 2025-10-11 210125.png

Screenshot 2025-10-11 211629.png

Screenshot 2025-10-11 211654.png

Actually 260g! Read full description! Make sure to check flushing volumes so they are the same as the profile picture&nbsp;Start with (black-grey-brown-red) in the AMS and after the built-in pause, change red to green. Assign red and green to the same AMS slot.&nbsp;For this to work best, I highly recommend using “Bambu AMS flushing volume gauge” by Micha31 with my retraction filament profiles to get the exact flushing volumes for your filament. I used all PLA: Bambu Matte Black, Polymaker Grey HTPLA, Protopasta Candy Apple Red, Elegoo Brown, and Shiny Emerald Green Amazon no-name. I made a Google Sheet mimicking the flushing matrix to record it. If you don&#39;t want to do that, add 25-50 on top of my values. Also, calibrate all the filament flow rates first for the best results. <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/539450-bambu-ams-flushing-volume-gauge?from=search#profileId-456738">https://makerworld.com/en/models/539450-bambu-ams-flushing-volume-gauge?from=search#profileId-456738</a>&nbsp; If you are using your own filament profiles, change them with the info in red circles in the pictures. A lot of filament savings come from it. &nbsp;A way to reduce print times is to add an &#34;AMS Speeder&#34;. I like the one by 4Designs. I didn&#39;t change the code for one, but it would cut down the print time by around 4 hours, so look into them.

Kmaster05 Profile: 0.16mm layer, 2 walls, 15% infill

Toothless dragon

ASIA

Print Profile(4)

Bill of Materials

Description

Comment & Rating (34)

License

Related Models