Parametric Monitor Riser – Monitor Lift (PiP)

Parametric Monitor Riser – Adjustable Monitor Stand (Print-in-Place)

A functional and fully customizable 3D-printed stand for monitors or laptops. This model raises your device to a more ergonomic height – ideal for office work, home setups, or gaming. It prints entirely in one piece – print-in-place, with no assembly, screws, or glue needed. The height and spacing can be precisely adjusted through parametric input values.

READ THE INSTRUCTIONS

🛠️ Features

• Print-in-Place
  No assembly required – prints in one piece
• Parametric Design
  Customize height and width via input values
• Support-Free
  No supports needed – clean print straight off the bed
• Stable & Compact
  Works with most laptops and monitors

🔧 Customizable Parameters

• Length of the small support cylinder
• Length of the main cylinder
• Device gap (e.g., for laptops)
  Base value “30” = 10 mm spacing
  → Each +1 adds 1 mm
  Example: “30+5” gives 15 mm total gap

🖨️ Print Settings

• No supports required
• Layer height: 0.2 mm recommended
• Material: PLA or PETG
• Print orientation: Cylinders horizontal to the bed

⚠️ Usage Note 

Do not place between keyboard and screen!
Always remove the stand before closing your laptop to avoid damage.

If you like my work/project consider supporting me with these options:

• leave a like
• leave a comment
• download the file
• or buy me a Coffee
• check out my Patreon Page!

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

If you wish to sell the physical 3D prints of my designs commercially

or use the LICENSE here on MAKER WORLD

• Obtain a Commercial Licence

Have fun printing

TBG