Can Dispenser (1 Print)
Print Profile(1)
Description
SODA CAN DISPENCER
_______________________________________________
About:
With this soda can dispenser you can print in one piece, no supports needed. You can load in up to SIX cans from the top or front. Because of its size it can be placed anywhere! In your fridge, on your counter, on the table, on your desk and even next to your Bambu printer! Enjoy.
____________________________________________
Steps To Print:
- If you use the 3mf all settings will be set if not you can use the settings listed below.
____________________________________________
Dimensions + Print Time + Filament Used:
- 225mm Long (9 inch)
- 125mm Wide (5 inch)
- 135mm Tall (~5 inch)
- 240g of filament used
- 4 hour print time
____________________________________________
Settings:
- .28mm Layer Height
- Top Shell Layers: 0
- Bottom Shell Layers: 0
- Wall Line Count: 2
- Infill Density: 20%
- Infill Pattern: Triangles (You can use what you think looks cool)
__________________________________________________
Extra:
~~If you want to make your can dispenser unique then change the infill pattern to get a different shaped infill
More Cool Prints: mwiller | Published - MakerWorld
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (49)