My wifes desktop wallpaper made into a hueforge print. I did play with the layer heights in slicer to get where I liked it.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Pla Black Transmission Distance: 0.3
PLA Space Blue Transmission Distance: 3.5
PLA Blue Transmission Distance: 4
PLA White Transmission Distance: 6

Swap Instructions:
Black until layer #11 at 0.96mm
Space Blue until layer #12 at 1.04mm
Blue until layer #13 at 1.12mm
White for the rest.