Chain Chomp (Super Mario) by HFN

HFN

Toys & Games>Characters

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

7.8 h

6 plates

4.7(16)

Open in Bambu Studio

Boost

182

251

284

383

Released

Description

CHAIN CHOMP SUPER MARIO

Size : ø100mm + chain
Set : 1x Body, 2x Teeth, 2x Eyes, 1x Attachment, 1x Chain or 1x Chain Elements *
Additionally : AMS recommended
Version : 1.1

After 3D printing (set is divided into 5 Plates) you can assemble the chain chomp and glue the individual parts together.
Glue the teeth (Plate 2) and the eyes (Plate 3) into the recesses provided in the body (Plate 1). Then use the attachment (Plate 4) to mount and glue the chain (Plate 5) to the back of the body (Plate 1).

* = You can use the chain elements (Plate 6) instead of the entire chain (Plate 5)

chain chomp

super mario

toy

Comment & Rating (21)

@sirdigbychknczr

Print Profile

0.2mm layer, 2 walls, 15% infill

absolutely made my son's day.

@cameo24

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out great! Easy to assemble

@jarrgray2002

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@llcmhdesigns

Print Profile

0.2mm layer, 2 walls, 15% infill

supports were horrible would not come off with out damaging the print it self.

(Edited)

The designer has replied

@_b_hfn

I'm sorry to hear that. I experimented a lot with the supports and this was the best result for me, as you can see in the pictures. With the settings (Support PLA), the removal was only a little challenging with the chain, but even here without destroying the printed part. Which part did you have problems with?

@llcmhdesigns

the supports on the chain the removal eats into the chain i done snug and auto and tree with slim not too much of a difference how well do you thjnk it would be on the overhangs just doing brimm

@_b_hfn

Replying to @llcmhdesigns :

Please take a look at the new 3mf file. I have adjusted the supports and it worked fine for me. Nevertheless, I have added a new plate, with individual chain links (plate 6). These can be put together with the opening (see photo) and used instead of the complete chain (plate 5). I hope I was able to help you with this 🤔

(Edited)

@timberxwolf

Print Profile

0.2mm layer, 2 walls, 15% infill

Print the individual links instead of the chain, Support residue was left all over the chain But the individual pieces are perfect. This is an amazing print, my kid loves it! I highly recommend.

The designer has replied

@_b_hfn

Thank you very much! It's nice when you get feedback like that and especially when the kid likes it 😉

@Richie2D2

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

good print

@gbollom

supports in the chains are a pita to remove and didn’t come off easy. could be something I did. other wise easy going and my son is loving it

@droidtech

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out great!

@user_1738956580

Print Profile

0.2mm layer, 2 walls, 15% infill

it was a really good design.

@user_3500583913

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Super Mario Bros. 3 World 1

Fletch

209

155

Super Mario Power and Poison Mushroom Multi Part

Playco3D

198

191

Super Mario Bros. 3 Landscape

Fletch

116

Super Mario Bros Hueforge

LoFi Layers