Baby Tooth Box by thibaut.ma

thibaut.ma

Tools>Medical Tools

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill. Based on stl file

Designer

1.1 h

2 plates

4.9(11)

0.16mm layer, 2 walls, 15% infill. Based on step file

Designer

1.1 h

2 plates

5.0(1)

0.16mm layer, 2 walls, 15% infill. Fuzzy surface

Designer

1.2 h

2 plates

Fuzzy Skin with Snapfit option

1.6 h

2 plates

Open in Bambu Studio

Boost

102

Released

Description

Edit 11.06.24 :

I add 2 print profiles, one based on a step file to improve the curvature as suggested and one with a fuzzy surface. As suggested by WingArt

Brown box is based on .stl file
Blue box is based on .step file
Bronze box with fuzzy surface

Edit 04.05.24 :

I change a bit the diameter of the tooth pin to have a better fit into the lid. Feedback about it are welcome

____

My daughter has just lost her first baby teeth so I made her a simple little box.

My first version was a simple box with a cover. Since then I add a twist and lock system to keep properly closed.

Comment & Rating (21)

@WingArt

Print Profile

0.16mm layer, 2 walls, 15% infill. Based on stl file

Nice idea! Step file would be better than stl, that would improve the curves.

The designer has replied

@thibaut.ma

I thought you can only use stl file, good to know step file are working as well. I will do an update. Thanks for the feedback

@WingArt

Replying to @thibaut.ma :

Cool! Sometimes you need to repair STEP files in the slicer, but the curves come out much cleaner. Another great feature could be adding a fuzzy skin to the cylinder.

@thibaut.ma

Replying to @WingArt :

Surface is definitively better with step file. And fuzzy surface is a good idea ! Thank you

@BertBee

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill. Based on stl file

Print comes out nice but the tooth does not fit into the lid too well! It is such a tight fit that I snapped one off whilst trying to fit it and I cannot get the other to fit at all.

The designer has replied

@thibaut.ma

thanks for the feedback. I just did an update on the tooth pin to have a better fit into the lid. Let me know if you have the chance to give it a second try.

(Edited)

@BertBee

Boosted

Replying to @thibaut.ma :

Thanks for taking the time to adjust it! Will print a new lid and tooth and see how they fit! You honestly did not need to go to the effort of modifying the design, your efforts are grwatly appreciated! I like the boxes none the less! The locking mechanism is great, would love to be able to design a locking mechanism like the ones you have on these boxes!

(Edited)