Valentine Rose Gift Box Container

Copyright Claim

Valentine Rose Gift Box Container

Boost
132
184
28
GIF
GIF

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
Designer
3.9 h
1 plate
4.9(21)

1 color, 0.2mm layer, 2 walls, 15% infill
1 color, 0.2mm layer, 2 walls, 15% infill
Designer
3.6 h
1 plate
5.0(2)

3 color, by object, 0.2mm layer, 2 walls, 15% infill
3 color, by object, 0.2mm layer, 2 walls, 15% infill
Designer
3.7 h
1 plate
5.0(2)

Boost
132
184
28
0
370
297
Released

Description

Perfect for sweeping your loved one off their feet! I wanted to design a beautiful, rose-themed gift box for Valentine's day - and this is what I came up with. The box features an intricately designed rose atop a cozy patterned lid. The lid is a friction fit design which easily slides on, and has enough grip to sustain a few bumps and shakes in case it moves around during transport. There's enough room inside to stow some jewelry, small trinkets, or even some treats!

 

Not only does this serve as a gift box, but it can be kept and used as a lovely desk organizer - so your loved one will have something to remember you by!

 

This is an easy print, with supports under the lid that pop right off and require no post processing.

 

CUSTOMIZING

A few profiles have been provided to help you color coordinate your prints without wasting filament through swaps. The model is designed so that the base and lid can be printed in the same color, with a different color for the rose - with only one filament swap. A third profile has been provided in case you want a different color for the base; this profile will print BY OBJECT to limit wastage.

 

Some suggestions:

  • The rose looks absolutely stunning in Silk Dual Color
  • The overall model also looks quite classy in all white
  • A black lid and base looks quite bold with a red rose
  • The rose in a glow or translucent filament would also look quite interesting
Different color combinations

PRINT SETTINGS

  • 0.2mm layer height works well
  • Examples were printed in Bambu PLA Matte, Silk, and Carbon Fiber - all worked well.
  • There is 0.07mm tolerance between the lid and base - be wary of this if scaling the model

If you get any “hair” this can easily be removed by flashing them with a lighter.

SUPPORTS

The lid requires normal supports, on build plate only

  • Top Z distance: 0.23mm
  • Support/object xy distance: 2mm

This will generate supports underneath the lid, which can easily be removed with a scraper if it doesn't automatically pop off when you remove the print from the plate (shown below). No supports or cleanup are needed for the rose.

Support structure will pop off easily if the above settings (or designer profile) are used.

PROFILES

I've provided a few profiles for different ways to print, including:

  • 2 color print (shown here)
  • 1 color print for no AMS or simplified print
  • 3 color print, allows you to set a 3rd color on the base without wasting filament through changes - this is printed BY OBJECT

Comment & Rating (28)

Please fill in your opinion
(0/5000)

Print Profile
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
printed beautifully. I need to adjust the settings throttle slicer for the filament I used on the rose to smooth it out but had no problems. Supports came out clean when I pulled from the plate.
The designer has replied
0
Reply
Those colors are a lovely combo!
0
Reply
Perfect.
The designer has replied
0
Reply
nice!
0
Reply
Print Profile
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
Looks awesome!
0
Reply
Print Profile
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
beautiful object, thanks!
0
Reply
Print Profile
1 color, 0.2mm layer, 2 walls, 15% infill
worked great!
0
Reply
Print Profile
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
Very nice, it went perfect. The perfect present and surpise
0
Reply
Print Profile
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
rose is oversized and lid didn’t fit
0
Reply
Print Profile
1 color, 0.2mm layer, 2 walls, 15% infill
Really good
0
Reply
Print Profile
Standard - 2 color, 0.2mm layer, 2 walls, 15% infill
easy to print, beautiful rose, and with a matte filament looks wonderful
0
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.