VENOM HUEFORGE:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA+ Esun Dark Blue Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 10

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #6 (0.56mm) swap to Dark Blue
At layer #7 (0.64mm) swap to White for the rest.

FINAL DESULT DEPEND TO FILAMENT USED.

HAVE FUNE WITH HUEFORGE AND HAPPY PRINTING