This is my latest HueForge addition and tribute to the original Universal Studio Monsters, The Mummy. This was printed using AMS with 4 colors. The filament change description follows for those that want to print using filament swapping.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Silver Transmission Distance: 2

PLA BambuLab Matte Latte Brown Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Silver

At layer #9 (0.8mm) swap to Latte Brown

At layer #16 (1.36mm) swap to Jade White for the rest.