Testing out hueforge and thought it turned out well enough to be shared. No AMS needed here are the swap instructions.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Inland Black Transmission Distance: 0.6
PLA Inland Red Transmission Distance: 5
PLA Inland Pink Transmission Distance: 2.8
PLA Inland White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #11 (0.96mm) swap to Pink
At layer #14 (1.2mm) swap to White for the rest.