注意:尺寸根据Polymaker品牌耗材纸芯设计!
Attention: Size designed according to the POLYMAKER !!!
将使用完毕的FDM耗材环保纸盘内芯作为设计主体,主要由大三角配件(Triangle)通过两面固定来使纸盘内芯配合成组,同时小三角部件(unit stand link)可以将各个组链接起来,无论是竖直摆放还是横置摆放,都能找到你的个性化需求。
The used FDM consumables eco-friendly paper tray core will be used as the main design body, mainly composed of large triangle accessories (Triangle) fixed on both sides to match the paper tray core into a group. At the same time, small triangle (unit stand link) can connect various groups, whether placed vertically or horizontally, you can find your personalized needs.
提供两种背板(底板):实心 和 带有掏空图案。
Provide two types of backboards (bottom plates): solid and with hollowed out patterns.
提供两种分隔配件:十字分隔 和 九宫格。
Provide two types of partition accessories: cross partition and nine grid.
图中大部分是由代用模型(unit model)来替代真实的环保纸盘内芯,因为我的手边目前只有5个环保纸盘内芯:P
Most of the images are replaced by unit models to represent the actual eco-friendly paper tray cores, as I currently only have 5 eco-friendly paper tray cores: P
当然你也可以选择直接打印待用模型来使用,但是强烈建议使用真实的纸盘内芯,在你打印足够多的耗材以后,也许你会有一面自己的环保成就墙面!
Of course, you can also choose to print the “unit model” directly for use, but it is strongly recommended to use a real paper tray core. After printing enough consumables, you may have your own environmentally friendly achievement wall!!!
注意事项:环保纸盘内芯的壁厚通常是不那么一致,在组装之前可以用笔刀修整边缘至合适的厚度,当然,小心不要划伤自己!
Attention: The wall thickness of the inner core of the environmentally friendly paper tray is usually not consistent. Before assembly, you can use a pen knife to trim the edges to the appropriate thickness. Of course, be careful not to scratch yourself!
我的打印设置:设备X1CC 0.4喷嘴 壁厚0.2 设备默认的Strength skirt=1,部件“unit stand link”开启了普通支撑。
My printing settings: X1CC 0.4 nozzle wall thickness 0.2 device default “Strength” skirt=1, component "unit stand link" has normal support enabled.