hi WarnockWares can you share a picture of the issue? did you removed the support inside the stem? 

SimonMakerForge

I removed the supports, the plug end of the power cable that plugs into the Google home is too big to slide through either hole in the base and in the Sunflower head

Warnock Wares

I'll re print it using your print profile, hopefully that solves the issue. Maybe the Google home where you live uses a smaller cord end 😅

Hey, so what's up with the stem/holes for the wires? My stock power cord doesn't fit through the stem or the holes. 

Just added the complete STEP file. Modify it as you need. ;-)
Hope this can help you for your device.

Can you also add the STEP files, because STLs are hard to remix, if someone wants to remix it.

mars3142

i love it but the Holder if the plant is a little bit Soft but ok

megapay

0.2mm layer, 2 walls, 15% infill

thank you! I'm waiting to receive the P1S printer (my A1 has been replaced due to bed issue) and I will review the model asap. 

hi Oli,
do you need different print profile then the already uploaded?
I have uploaded the .3mf file so I believe all information are already available.
let me know if something wrong or to adjust.

Hi,
will you also upload a print profile?

GoldichForge

Hi,
I agree with you on some difficult to remove the support. Probably I need to review the design in order to optimize it. You can use PETG as support but for sure the printing time will be very very long.
So, thanks for your feedback I will check for some mofication. While that I added also the complete step file for your enjoy.

It was really hard to remove the support and my Nest Mini fits perfectly. The original Google Home Mini isn’t usable with it, because of the power plug.

Maybe it should be used tree support and not within any holes.

cover

20240124_194633_9c277110-67c2-404c-be64-31173fa4f3e0.jpg

20240124_211604_f4cf9b3f-3ac1-482a-b276-b95367bd6656.jpg

Google Home SunFlower Holder v25_9de09541-a79e-4167-9d41-376b8f324b33.png

Google Home SunFlower Holder v25 -2_499927cf-b3a8-45d3-bb8f-ebb3398abc9e.png

Google Home SunFlower Holder v25 - Render_fc2ac61f-8351-4b06-8693-3a311414e1ff.png

20240125_194929_bb94dc79-4d4f-4661-9b7f-2077046958af.webp

plate_1.png;filename*=utf-8''plate_1.webp

plate_2.png;filename*=utf-8''plate_2.webp

plate_3.png;filename*=utf-8''plate_3.webp

plate_1.png

plate_2.png

plate_3.png

Pay attention when printing Voronoi letter holder wich can be a little tricky to remove the support.Use support for the Stem and sunflower.Petals are thin so pay attention when you remove the support from the sunflower.&nbsp;When you assemble all togheter:<ol><li>insert the wire first in the base from bottom,</li><li>insert the Stem and adjust the wire</li><li>insert the main support in the sunflower and be sure the three plastic teeth engaged.</li><li>Now connect the wire to the device Google Home Mini and carefully insert it in the main support. Pay attention to petals.</li><li>Enjoy (see pictures for the results)</li></ol>

You can now transform your static Google Home Mini in a beautiful Sunflower with a base where you can add a plugable letter/note holder, or you can also design your plug-in for different tool.&nbsp;

Print Profile(1)

Description

Comment & Rating (13)

License

Related Models

Sunflower Alphabet & Numbers

Incense stick holder Frogy

Google Home Radio Holder

Home key holder

Sunflower Holder for Google Home Mini (Nest)