I wanted to design a small WDT and tamper holder for my coffee setup. The WDT holder should fit the majority of WDT tools out there and the tamper slot is sized to 59mm.

Printed on: Bambu X1 Carbon

Layer Height: 0.2mm

Infill: 15% for the top and 35% at the bottom (if you want a heavier stand)

Material: PLA

Supports: Painted supports for the large overhang on the WDT stand. You can try without supports, but you might have to cut way any parts that sag.

Option:

• I cut out a 6mm thick piece of cork to soften the part under the tamper.