Cute Chicken
Cute Chicken
Print Profile(1)
Description
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Stone Blue Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Wine Red
At layer #12 (1.04mm) swap to Stone Blue
At layer #16 (1.36mm) swap to Jade White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
