shanks
Print Profile(1)
Description
Project: shanks.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Jade White
At layer #19 (1.6mm) swap to Red
At layer #27 (2.24mm) swap to Indigo Purple
At layer #30 (2.48mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)