Flexi Rex Fire expansion
Remixed by
Copyright Claim
Flexi Rex Fire expansion
Remixed by
Boost
27
36
5
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
32 min
1 plate
Boost
27
36
5
1
59
22
Released
Description
Dusted off old rex for this upgrade!
Able to print all three as separate objects on one plate to reduce filament swaps only takes about 30 mins.
It is a friction fit so no adhesives required, but be aware it is VERY tight, like rubber mallet to tap it in place assembly tight.
Yes be prepared to have some sort of clamp or mallet to assist with squeezing or beating it all together.
Comment & Rating (5)
All
Boosted
Sometimes it's the simple things that give me the most joy. Seeing my kids run around with a glow in the dark T-Rex with "ice flames" makes me happy. I printed it in light blue and grey so that goes along nicely with the mostly transparent glow in the dark filament. Sorry I don't have a picture to share the finished product was very nice.
The designer has replied
1
Reply
Awesome happy everybody is liking it!
0
Reply
wish it was printable on A1 Mini
The designer has replied
0
Reply
While I don’t have one I would suspect you should be able to download and change the printer in you slicer?
Have you tried changing the printer in the upper left? You might not be able to change on the mobile app but I would think you could change it on the computer.
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
The fit is exceptionally tight, might be good to print some pieces 1% smaller so they fit easier. Print it you'll see.
(Edited)0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld