picatchu
Print Profile(1)
Description
Project: pcatchu.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 137.14x240mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 3.28mm and the Actual Thickness is 2.88mm
Filaments Used:
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#8e9089 PLA BambuLab Basic Gray Transmission Distance: 2
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#00aaff PLA Generic bleu clair Transmission Distance: 4
#40e0d0 PLA Bambulab Basic Turquoise Transmission Distance: 5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 8 unique filaments
Swap Instructions:
Start with Jade White
At layer #8 (0.72mm) swap to Gray
At layer #10 (0.88mm) swap to Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Red
At layer #20 (1.68mm) swap to bleu clair
At layer #24 (2mm) swap to Turquoise
At layer #25 (2.08mm) swap to Yellow
At layer #31 (2.56mm) swap to Red
At layer #35 (2.88mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)