Meet Cthulhu! This stl is printet in multicolor way. You don't need AMS. It can be printed with any printer you have the possibility to do a manually filament swap. Feel free to mix the colors and try it with your own filaments at home. The out coming is very nice!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #12 (1.04mm) swap to Ice Blue
At layer #15 (1.28mm) swap to Jade White for the rest.