Artwork generated with Dall-e.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Meta Sunlu Black Transmission Distance: 0.9
PLA Amazon Basics Grey (dark) Transmission Distance: 2.4
PLA BambuLab Basic Red Transmission Distance: 4.2
PLA Overture Pro Yellow Transmission Distance: 4.8
PLA Amazon Basics Pearlescent White Transmission Distance: 10
PLA SunLu White Transmission Distance: 6.6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey (dark)
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #15 (1.28mm) swap to Pearlescent White
At layer #24 (2mm) swap to White for the rest.