You are looking for the perfect gift box for your loved one? Then the low poly heart box with drawer may be the perfect item to present something special like jewelry or sweets! No support or brim needed (printed on PEI plate)

Dimensions

• S: 30x50x40mm / 1x2x1.6 inches (LxWxH)
• L: 45x75x60mm / 1.8x3x2.3 inches (LxWxH)

Style

• with handle
• with hole for a decorative tie/lash (see the pictures!)

For better usability I added a magnet (6x1mm) on both parts. You have 0.5mm clearance around the drawer which leads to a smooth working drawer even with difficult filament and the magnets will hold all in place. If you want to use it without magnets I propose to print the box first, measure it and scale the drawer by 1 or 2% to fit exactly. I did so for the purple heart on the pictures but this takes one or two attemps sometime depending on printer tolerances and filament. As said with the magnets it is more convenient.

If you use other magnets you can easily add a negativ cylinder in Bambu Studio or just leave me a comment and I will add additional versions.

I would appreciate if you leave me a like and a picture of your make would be even better. Also check out my other models. Have fun with it!

Notice: On the first picture I used the Ferrero chocolates to demonstrate the dimensions only. You can't close the drawer on the S size box with this particular chocolat. For the L size you clearly can fit 3 of those in it. Also the print quality of the purple heart looks not that good as I used an Anycubic Mega S with 0,2mm layers. The blue one was printed on the A1 with 0,16mm layers and this looks delicious!