Night Light
Print Profile(2)
Bill of Materials
Description
Night Lamp – Stylish & Easy to 3D Print
Here you will find a stylish lamp that you can easily print yourself – perfect for a pleasant atmosphere at home.
Two variants are available:
🧷 Variant 1: Glued
🔩 Variant 2: Screwed
______________________________________
🛠️ Recommended Print Settings:
🔲 Main part
- Optimal layer height: 0.16 mm for fine details
- Time-saving alternative: up to max. 0.20 mm
🪵 Back panel with diffuser
- Recommended: 0.20 mm
- Maximum: 0.24 mm
- This ensures a particularly soft, pleasant light – ideal for a cozy atmosphere.
💡 Note on the back panel:
- The back panel is intentionally slightly loose, as I glue it before shipping.
If you prefer a tighter fit, you can enlarge the back panel in the slicer by 0.5 % to 1 % – simply try what works best for you!
🔧 Details of the glued version
- LED holder: This should be fixed with some plastic adhesive.
- LED strip: Simply insert – the adhesive surface on the back usually holds them well.
The printed support prevents the strips from detaching when heated (e.g. by COB LEDs). Recommended length of the LED strip: at least 74 cm
🔩 Details of the screwed version 🔩🪛
- Required accessories:
- 5x M3x6 heat-set inserts
- 5x M3x12 screws
- 🔧 Tip: Please do not tighten the screws too much to avoid damage.
I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback!
Happy Printing!
Membership
Information on commercial licensing on MakerWorld
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)