An editable nameplate for a door or display purposes. It includes an optional border so you can add a different color around the edges.
IMPORTANT:
The nameplate should be printed with a 0.2mm nozzle for good results. (The Federation logo will show the fine detail, and the letters will be nice and crisp.) The border can be printed with a 0.4. In fact, I recommend using a 0.4 for the border or it will take 3 hours to print it. The Bambu Studio project was saved with a 0.2mm nozzle using a profile of .1mm layer height at high quality.
The font I used is called Arian LT. It can be freely downloaded from the Internet.
If you use the new profile with 4 walls, print time with a 0.2 nozzle is approximately 5 hours for the nameplate. Make sure that you reposition any text after editing. All objects on the plate should be a height of 0.4 and positioned at 0.65 on the Z axis.
INSTRUCTIONS:
This was designed to be printed in 4 colors, and the profile has the AMS set up this way:
You can arrange your AMS however you want, but you may need to recolor elements on the plate. To do that, right-click on the object in the list of objects and change it to a new filament color.