Thunderbolt Platform
Print Profile(2)
Description
This stand requires the lower wing and the main body to be separate (do not glue), they need to pass through the stand's loop
For the Rai model, please visit my homepage for the full segmented version of Rai
Note: The lightning pegs have been optimized with end shrinkage, making them easy to insert. It's not necessary to insert them all the way, just enough is fine
The second profile has a simplified stand. Real pictures showing the assembly method of the back clip and the position of the lower wing pegs are available on the profile cover
Overview
Lightning position diagram
Main peg and back clip orientation diagram
Wing peg position diagram
Supporting lightning
Used to relieve some pressure on the wing pegs
The base is inserted slightly angled outwards. Pay attention to where the lightning passes through. The red line indicates the number of wing branches below the lightning
Side lightning
The main way to distinguish left and right is by the length of the base
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)