Stormtrooper
Print Profile(1)
Description
Kept it simple—just wanted to bring out that cold, uniform army vibe. White armor, black backdrop. That’s all it needs. ⚪⚫💥
If you are interested in my work and want to learn more about me and my creations, follow me here: https://linktr.ee/Terry.creation.
I’d greatly appreciate your support on Buy Me a Coffee: https://ko-fi.com/terrycreation.
For commercial licenses, visit: https://patreon.com/TerryCreation.
Boost Me (for free)
Printing Instructions
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 220x220mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #21 (1mm) swap to Blue Gray
At layer #31 (1.4mm) swap to Ash Gray
At layer #38 (1.68mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)