Another Hueforge , this time I was inspired by classic Portuguese / Dutch tiles , I chose to go for the much used blue colour style.

If you use the included print profile all settings are configured correctly (colorswaps, infill, layerheights…)

If you download the STL please use these settings :

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.4mm) swap to Blue
At layer #15 (0.76mm) swap to Ice Blue
At layer #19 (0.92mm) swap to Jade White for the rest.
 

--------

Be sure to check out my other models and/or give me a follow :)

ps : if you want to rescale the image : make sure the Z-height doesn't change. X/Y are no problem.

More info about the inspiration :

Azulejo - Wikipedia

Category:Delftware tiles - Wikimedia Commons