Adjustable Nozzle Indicator for most common nozzle sizes 0.2 0.4 0.6 and 0.8
Copyright Claim
Adjustable Nozzle Indicator for most common nozzle sizes 0.2 0.4 0.6 and 0.8
Boost
21
48
2
Print Profile(3)
0.16mm layer, 2 walls, 15% infill
Designer
14 min
1 plate
0.16mm layer, 2 walls, 15% infill
Designer
39 min
3 plates
0.16mm layer, 2 walls, 15% infill
22 min
1 plate
Boost
21
48
2
0
69
28
Released
Description
Adjustable Nozzle Indicator for most common nozzle sizes 0.2 0.4 0.6 and 0.8
If you often change the nozzle in your printer, or if you have several printers with different nozzle diameters, this nozzle indicator will come in handy. By turning the wheel, you set the dial according to the nozzle size you have currently installed in the printer and it clicks on fixed positions.
Prints easy and fast - apart from the STL models, also print profiles for BL A1 are included. Once printed, a small drop of glue keeps the parts together. Can be attached to flat surface using double side tape.
Comment & Rating (2)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
PETG for the base (because I planned to stick it onto the printer casing which can be pretty hot), PLA for the top and dial. came out without any problem
Just reprinted the dial with z downscale (from 2mm to 1,80) making it easier to spin it with one hand
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
printing is fast and easy. made one for each A1 printer.
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (2)
© 2024 MakerWorld