Hooded Stranger 28mm (No supports, FDM)
Copyright Claim
Hooded Stranger 28mm (No supports, FDM)
Boost
52
102
38
Print Profile(4)
0.12mm layer, 2 walls, 15% infill
32 min
1 plate
0.2mm nozzle, 0.06mm layer, 3 walls, 10% infill
1.7 h
1 plate
0.2mm nozzle, 0.06mm layer, 3 walls, 10% infill
1.1 h
1 plate
0.2mm nozzle, 0.06mm layer, 3 walls, 10% infill
1.7 h
1 plate
Boost
52
102
38
20
201
182
Released
Description
A hooded stranger, could be a cultist, monk, or just a cloaked traveler.
Suitable for 28mm tabletop games.
Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3.
There are variants with square and round bases.
NOTE
A Lich with glowing LED eyes seen in the photo is available on my Patreon.
Let me know how it printed for you in the comments and makes!
This and other uploads are possible thanks to my wonderful Patrons.
If you enjoy it, buy me a drink once in a while and support more supportless models on Patreon!: https://www.patreon.com/BriteMinis
Category: GamesComment & Rating (38)
All
Print Profile
0.12mm layer, 2 walls, 15% infill
Printed with no issues. I used a .4 nozzle but plan on using a .2 nozzle to get more details. Thanks for the model.
1
Reply
Print Profile
0.2mm nozzle, 0.06mm layer, 3 walls, 10% infill
Very good model, easy to print.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
This was my first print with my new machine!
0
Reply
Boosted
Print Profile
0.2mm nozzle, 0.06mm layer, 3 walls, 10% infill
came out perfect
0
Reply
Boosted
Print Profile
0.2mm nozzle, 0.06mm layer, 3 walls, 10% infill
printed really great with 0.2 nozzle, like resin
(Edited)
0
Reply
Boosted
Print Profile
0.12mm layer, 2 walls, 15% infill
Honestly, I am blown away at how great this model prints using a 0.2 nozzle and the suggested print settings from Fat Dragon Games. It's near-resin quality to the naked eye (but you can see minute layer lines in a few places with a macro lens as shown). No supports; amazing work!
0
Reply
This is printed on a bambu x1 carbon. Worked out great. It is 55mm high. Very nice details. And the nice thing about this print is that you can print it without supports
0
Reply
Boosted
Print Profile
0.12mm layer, 2 walls, 15% infill
great
(Edited)
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
very nice first print with the 0.2 nozzle
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
parfait en Pla matte, couches 0.08, buse 0.4
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld