Drift Lightbox

Drift Lightbox

I designed the logo as a lightbox for all drift friends and those who want to become one. A must for every track and every drift room.

Please do not change any print settings, otherwise a good result will not be achieved. Any LED strip light chain can be used for illumination. Simply open the lid and glue it to the edge.




I look forward to pictures in the comments. If you have any questions, just comment.

Powered by Lightbox Maker from MakerWorld (https://makerworld.com/makerlab/lightboxMaker)

Good drift and good print (;

Note:
This model is an unofficial fan project and is not affiliated with the Carrera brand or its owners.
The designation "Carrera" is only used to describe compatibility or the intended use.
All brands and logos are the property of their respective owners.
Not an official Carrera product.
All brand names, logos and product designations used (such as Carrera, Ford or others) are the property of their respective owners and serve exclusively to describe, better assign, and indicate the compatibility of the products. There is no connection to the respective companies and the mention does not constitute an endorsement, partnership, or sponsored connection.

This 3D printed product is not an original part from the manufacturers Carrera, Sturmkind or other mentioned brands. It is a compatible accessory/replacement part or an extension from an independent supplier/manufacturer and was developed independently. Use is at your own risk.