Uno Cards Hardcase by Tridense

Tridense

Toys & Games>Other Toys & Games

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

34mm stack, High res, standard cardstack, 0.12mm layer

Designer

3.4 h

1 plate

4.8(102)

38mm stack, Higher res, 0.12mm layer, 2 walls, 25% infill

Designer

3.5 h

1 plate

4.7(45)

Mini, 0.2mm layer, 2 walls, 25% infill

2.6 h

1 plate

4.9(39)

103% upscale, 20mm cut from inner, 0.2mm layer, 2 walls, 25%

2.4 h

1 plate

5.0(2)

Click to see more

Open in Bambu Studio

Boost

1020

1776

532

202

3.1 k

3.3 k

Released

Description

This is a model I've designed myself. As the model is not behind a paywall, support is appreciated!
https://www.buymeacoffee.com/Tridense

Bring the Uno cards safely into your suitcase or backpack with a new plastic case that wont dissolve after a few uses!
Holds all 108 uno cards in a standard pack

Press on the sides of the top piece to release the lid

Fits both of Mattel's Uno and Dos cards

Print at 0.2mm layer height

All the parts are pre-oriented for printability.

The regular parts are for up to 34mm tall cardstacks.

The wider parts are for up to 38mm tall cardstacks.

Please measure your cardstack before you print so you know which size to use.

Changelog:

2023.09.23: Added a version for taller cardstacks if you have additional cards

2023.09.14: Added blank version if you have other cards like “Dos” or alike.

2023.09.11: Improved locking slightly. (Case top v2)

Comment & Rating (532)

@Jonnycraft

Print Profile

1 Plate, 4 Color AMS, 0.2mm layer, 3 walls, 25% infill

Nice case for my minimalistica UNO cards, but I had some issues with the filament change from black to white like you can see on the picture

The designer has replied

@Botaz19

Boosted

Looks very clean and nice tho :)

@juanclazaro

Hey, how did you print it using multi color? If I set it like it is designed in 3 colors, then it takes more than 1 day to print. Did you change the orientation of the piece or you changed colors manually? Thanks

(Edited)

@british48917

Print Profile

38mm stack, Higher res, 0.12mm layer, 2 walls, 25% infill

Came out looking perfect. However, when you put the top on and then take it off it scratches because its so snug.

The designer has replied

@Tridense

Thanks for the feedback, the scratching is intended because its how the locking mechanism works

@british48917

Replying to @Tridense :

if you zoom in to the picture the box on the left you can see the scratches produced by opening the box just 3 times.

@Tridense

Replying to @british48917 :

This is how it is for me as well :) You can see the cover photo

@DrShokola

The print profile is no longer public

sides are very weak and like to brake when u press where it says to. I increased the wall loops and now the print turned out fine

(Edited)

The designer has replied

@Tridense

I would try with another filament, maybe your filament is wet or brittle? I printed in PLA

@DrShokola

Replying to @Tridense :

I tried a few diffrent filaments. I increased the wall loops and all good now it still cracked slightly but works well

@alexandre_00

The print profile is no longer public

First print ever. Very surprised by the quality! Thank you.

The designer has replied

@Tridense

Looks great, welcome to 3D printing!

@Chibi_Grim

gerat Design 👍

The designer has replied

@Tridense

Thank you!

@Christopher907

The print profile is no longer public

came out alright with my Printbed Sour Apple. seals up and stays closed, won't loose my cards now.

@ValdiLab

The print profile is no longer public

Could be better, just by adding a gyroid infill instead of the crossed one, but for sure it's a great item to store and keep organised all UNO cards! Good job!

@DesignJT

Print Profile

38mm stack, Higher res, 0.12mm layer, 2 walls, 25% infill

prints well, works as intended!

(Edited)

@rijads

The print profile is no longer public

Haven’t had time to put in use yet but it looks really good

(Edited)

@jr2142

Print Profile

34mm stack, High res, standard cardstack, 0.12mm layer

Nice design, snug fit.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.