impression s est bien passée les supports se sont enlevé sa s laisser de trace. impec 
merci pour ce modèle 

riouk83000

Optimized (Standard)  0.2 - Durable. Print Any Amount. 2 Colors.

The_Tumbler_Grip

Good model, bottom could have been better 

A3Dprints

0.2mm layer, 2 walls, 15% infill - Single

One support broke while printing, other than that very nice! 

Pappaprintar

1 Color ⭐ - Optimized (Standard) 💎 0.2 - Durable. Print Any Amount.

These print amazing! Almost can remove all supports entirely by hand and quality is superb

Monkstrosity

Nice print and the support was easy to remove 

1 Color - Optimized (Draft) - 0.24 - Durable. Print Any Amount.

Ninjamuh

Optimized (Draft)  0.24 - Durable. Print Any Amount. 2 Colors.

GreyArchon

Legion_74

FAST 42 Minute Print!, 0.2mm layer, 2 walls, 15% infill

THE NOG

cover

2023-09-21_5yytfjhwa7po.jpg

2023-09-21_1d7s6srksb88.jpg

plate_1.webp

plate_1.png

10 instances of the model. The more the merrier!

0.2mm layer, 2 walls, 15% infill - 10X

2col 0.2 std.webp

App - More Copies v1.webp

Pumpkin Ornament

kvnper

👉 When printing from the app, increase the ‘Copies’ quantity to print more copies at one time (See Photo)&nbsp;2 Color (For 1 color, assign both preset colors to the same color/filament roll)<ul><li>Nice bottom of model - The bottom prints clean, and support free.</li><li>Durable - Stem is fortified to avoid breakages. Get a long lasting part.</li><li>Good Quality - A variable layer height is used, with a max of 0.2 layer height.</li><li>Reliable First Layer - Settings tweaked for a reliable first layer.</li><li>Clean Stem Supports - Easy to remove support structure.</li><li>Various Quality Tweaks</li></ul>&nbsp;<ul><li>0.4 noz</li></ul>

2 col 0.24 fast.webp

👉 When printing from the app, increase the ‘Copies’ quantity to print more copies at one time. (see 2nd photo)&nbsp;2 Color (For 1 color, assign both preset colors to the same color/filament roll)<ul><li>Nice bottom of model - The bottom prints clean, and support free.</li><li>Fast/Draft, Good Print - Fast/draft print without cutting essential corners.</li><li>Durable - Stem is fortified to avoid breakages.</li><li>Reliable First Layer - Settings tweaked for a reliable first layer.</li><li>Clean Stem Support - Easy to remove support structure</li><li>Various Quality Tweaks</li></ul>&nbsp;<ul><li>0.4 noz</li></ul>

casper7mmx

0.2mm layer, 2 walls, 10% infill

tkriesmair

<ol><li>Tree-Support on Build-Plate only</li><li>Gyroid-Infill</li><li>Lower layer height 0.12 mm</li></ol>

*Optimized*  Tree-Support, 0.12mm, 15% Gyroid,

Botaz19

2 Colors AMS, 0.2mm layer, 3 walls, 15% infill

PumpkinVLH2.webp

PumpkinVLH.webp

TBone_427120

Printed in black and white because I didn't have orange, and to verify that no marks are left by the support for the stem. Two walls are plenty strong for the base with only a little lightning infill needed for top.

Variable layer height, 2 walls, lightning infill

Smaller layer heigth → 0,12 mmGyroid Infill

0.12mm layer, 2 walls, 15% Gyroid-infill,

DAUser12

0.16mm layer, 2 walls, 15% infill

faysalceliktug

Filamently

<ul><li>Model scaled to 110%</li><li>Twelve (12) copies on one plate</li><li>Painted supports under stem and loop (snug, manual)</li><li>Multi-color - orange body, green stem (w/ prime tower)</li><li>Printed in PETG</li><li>.2mm layer height</li><li>4 walls</li><li>0% infill</li></ul>

12 copies @ 110% scale, 0.2mm, 4 walls, 0% infill

Pumpkin topper.webp

Justin Yu

Added a negative part to turn this into a straw topper. super fun.

0.08mm layer, 2 walls, 15% infill

For those of us that leave a Christmas tree up year round (we're not lazy, just festive…) here's a cute little pumpkin for it.&nbsp;PrintingI advise enabling adaptive layer height to make it pretty and supports to make the stem print successfully.&nbsp;MaterialsI used PETG to get good layer adhesion to better ensure the stem and loop don't break, but PLA should work too. Either use an AMS or make sure you do a filament switch when it gets to the stem to make it another color!&nbsp;You'll either want to use a paperclip or dedicated ornament hangers to hang these on your halloween tree

Print Profile(14)

Description

Comment & Rating (203)

License

Related Models

Gladiator's helmet

Vampire Pumpkin

NIMI Dragon-Slaying Spellbook

Klein Bottle Funny Container ornaments克莱因瓶摆件