The wall was wobbly when printing and caused surface issues. Might need a little reinforcement to stiffen when printing. the rest of the print was great! Printed with Bambu PETG-CF. 

user_395058433

0.2mm layer, 2 walls, 15% infill

thanks for the tip!  I’ll look into making the walls a bit thicker to stop that from happening.

jgruber15

cover

IMG_0336_b1cbef68-341c-42a3-9787-504e02ca8ec5.webp

plate_1.png

Printed in PLA which is fine for indoors, do recommend ASA/ABS/PETG for anything other than inside.  Only takes supports on the small overhangs, prints pretty quickly as well.

As a collector of Koozies, I looked for a cool design hold a bunch of can size koozies, couldn't find one, so I made one.&nbsp;No idea how many it holds, but it's a bunch.&nbsp;Best if printed in PETG or ASA (if you want to use it anywhere but inside the house).

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models

XTOOL HONEYCOMB CAN KOOZIE JIG

Suit Bottle Koozie

Green Dragon Mug

Canpedo - Soda Can holder Koozie

Koozie Holder