POLYMAKER PolyTerra Cardboard Spool Ring for AMS
Copyright Claim
POLYMAKER PolyTerra Cardboard Spool Ring for AMS
Boost
31
83
30
Print Profile(1)
Recommended | 0.2mm layer, 2 walls
Designer
55 min
2 plates
Open in Bambu Studio
Boost
31
83
30
2
172
375
Released
Description
Description:
This Spool ring wraps the edges of a POLYMAKER 1kg cardboard spool in order to:
- provide smooth rotation within a Bambu Lab AMS
- prevent carboard debris from depositing within a Bambu Lab AMS
- prevent the cardboard spools from damaging
Fits perfectly the PolyTerra spool but can also be used with most of the filament brands with the same spool dimensions.
Comment & Rating (30)
All
Print Profile
Recommended | 0.2mm layer, 2 walls
very nice file. fits great on PolyTerra filament.
(Edited)
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
These rings print quickly and worked perfectly. I'm using them on my Overture spools as well, although the holes don't always line up. It still works!
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
I printed in PLA and the spool would slip in the AMS when it was retracting the filament. If you use a different material it might work better. The file printed great.
1
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
Doesn't fit the AMS
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
flawless
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
Super handy to have on hand for my cardboard spools
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
Works perfect with the AMS, and with polymaker as well of Elegoo spools, really nice design.
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
great Polymaker adapter, it does make the spools a little high for the AMS, I just leave it unlatched when printing with these spools
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
much needed addition to cardboard spools. I use almost all inland and elegoo spools, so this is a must. you WILL need an ams lid riser to go with this or your spools will bind against the lid.
0
Reply
Print Profile
Recommended | 0.2mm layer, 2 walls
works great in the P1S.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld