Adjustable phone stand by 3D servis

3D servis

Household>Office

GIF

Print Profile(9)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

all on one plate

Designer

5.6 h

1 plate

4.6(175)

5 plates

Designer

6.8 h

5 plates

4.6(17)

worm - 2 parts

Designer

46 min

1 plate

4.9(12)

lower part

Designer

30 min

1 plate

5.0(3)

Click to see more

Boost

741

1259

307

3.6 k

2.9 k

Released

Description

The stand is able to tilt according to your needs

Easy print without supports nor glue

Tested with PLA and PETG

If you have problem with print of worm, you can print profile worm - 2 parts. It's without glue, only connect together with nuts

Added bottom part with lower “horns”

Upload new version for ipad (tablet)

https://makerworld.com/en/models/216325

stand

phone

holder

Comment & Rating (307)

@jhdupont63

really bad print. have now tried 3 times to print it far that stands up and each can fail it with 10 & back. waste of filament

@gurktomat10

use a large brim, about 10mm and make the brim-object gap .05

@jasonakamacgyve

Mine broke in the same spot putting it together.

@sparroff

я включил поддержу

@user_2152571041

非常nice的设计，打印主要注意那个大螺纹杆，建议切片里面分件，两端可以有螺母咬合，胶水都不用上，立起来加brim还是容易翻车。

(Edited)

The designer has replied

@3Dservis

good idea. Thank you

@petrkilar

nice model, thanks to the author, I printed from the profile of the author, everything went smoothly.

@Jtlrwells

what filament did you use? I love that shade of blue

@petrkilar

Replying to @Jtlrwells :

https://www.aurapol.com/p/aurapol-pla-3d-filament-metallic-blue-1-kg-1-75-mm

@Salahunreal

Print Profile

all on one plate

amazing design. i liked it very much. i printed the shaft alone and reduced the speed and worked without issues.

The designer has replied

@3Dservis

nice work

@hwei

Print Profile

all on one plate

Great model. Remember to screw in the threads carefully to not break the parts. If it's stuck, unscrew and try again--it'll be perfect after a few tries.

@TheDelaminator

Printed perfectly all on one plate. Used a brim for the worm gear. Nice model and fun to adjust the tilt. I will use a lot.

@user_3675777535

Jaw dropping print quality. well done. may i ask what filament this is and how much tinkering you had to do to get this to print so well?

@TheDelaminator

Replying to @user_3675777535 :

Bambu PLA Basic. Default profile with a few changes. I dropped the outer wall print speed to 60 mm/s and the inner wall to 250 mm/s. I used 15% sparse infill with the Cubic pattern. Printed on Textured PEI Plate.

(Edited)

@jinritt

这模型有问题，打了4次都失败了，我放弃了。最后说一下，双弟耗材太垃圾了，两次都是断了，底部没开中间断了，换了兰博是不断了，但是粘不住。试了裙边和筏层又降速都不行。

The designer has replied

@3Dservis

you need brim

@zzzddd

要自己画支撑，把底下加牢固了

@Malcolm11

Print Profile

all on one plate

added a raft just in case and it worked perfectly

@Juergen.Schappl

Print Profile

all on one plate

Sehr schönes Design, ohne Probleme gedruckt!

@elduder

Print Profile

all on one plate

Nice, printed fine, I did it in 2 plates. The only issue is the tab on the back of the phone holder doesn’t hold all too well. I clipped away some of the back plate so I can use it for photography too if need be. Thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(9)

Description

Comment & Rating (307)

License

Related Models

Adjustable Tablet Stand 2

Minimal phone stand

phone holder Jordan

Phone Stand