Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 3.8
PLA PolyTerra Sunrise Orange Transmission Distance: 4
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #5 (0.64mm) swap to Lava Red
At layer #10 (1.04mm) swap to Sunrise Orange
At layer #16 (1.52mm) swap to White for the rest.