Love couple in Paris 💞
If you have AMS just use provided print profile
Swap Instructions (if you do not have AMS):
Start with black PLA Basic | Bambu Lab EU
At layer #27 (2.28mm) swap to Red PLA Basic Refill / 1kg / Yellow (10400) | Bambu Lab EU
At layer #32 (2.68mm) swap to Gray PLA Basic Refill / 1kg / Yellow (10400) | Bambu Lab EU
At layer #34 (2.84mm) swap to White PLA Basic Refill / 1kg / Yellow (10400) | Bambu Lab EU
Experiment with other colors or use even more!
You can scale up and down but only X and Y. Z axis must remain the same as original