Drawer organiser for a standard 600mm wide cabinet with Blum brand drawer hardware.

I wanted to maximise the space in the drawer and I designed them around what gadgets and doo-dads we have in our (messy) drawer. I also wanted removable tubs so cleaning them out is super easy.

I contoured the Side tubs to match the internal curvature of the drawer.

Internal dimensions are in the photo, 523mm wide and 475mm deep.

Created in OnShape https://cad.onshape.com/documents/4e97561d9d7ac45b1b9fd906/w/656936e8ae6b70c2181dce28/e/0bf390ee7929762613226cb5?renderMode=1&uiState=65ad989c4b8ff86d83342588

You will need to print the following. (the .3mf file attached has all required copies)

2 x A

4 x B

2 x C

1 x D

1 x E

1 x F

2 x G

2 x H

NOTES:

1. Supports are required for all of the Side tubs.
2. For smoother fillets, turn on variable layer heights.
3. The 2 x C's and 1 x D can be glued together.
4. The front and back rows, Parts A and E, are not the same length.
5. Parts G and F are slightly longer to make up the ~1mm extra space at the back of the drawer
6. I ran out of grey filament mid print for part F, oops
7. This could be further optimised to make parts clip together etc but I'm pretty happy how it is for.