Tollerance Coin test by Chamomile_3D

Chamomile_3D

3D Printer>Test Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Recommended |0.2mm layer, 2 walls

Designer

16 min

1 plate

4.7(38)

A1 Mini | 0.2mm layer

Designer

17 min

1 plate

4.8(4)

Open in Bambu Studio

Boost

207

431

323

Released

Description

Test your printer tollerance and accuracy!

The numbers in each circe represents the distance in mm between the outer and the inner wall for each side.

Requires only 3 grams and lets you know if you have to calibrate your printer flow!

NOTE!

The 0.05mm gap can be able to spin only with 0.2mm nozzles.
Using a 0.4mm nozzle, the slicer will not consider this tiny gap and will fuse the parts together.

Comment & Rating (52)

@user_2882689938

The x1c also made it!

@user_2882689938

Printed on the p1s with 0.4 nozzle! Slice gap radius changed from 0.049mm to 0.0049mm and it also prints the 0.05 Printed with ABS

(Edited)

The designer has replied

@chamomile3d

Wow! Thanks for sharing this!

@VERSE187

Print Profile

Recommended |0.2mm layer, 2 walls

printed well with silk pla from Amazon. As you said only one will fuse with 0.4mm nozzle

@Hugz

Worked well with PLA thanks

@svnjcby

Print Profile

Recommended |0.2mm layer, 2 walls

mit 0.4er Nozzle gehts ab 0.10mm los. 0.05mm sind NUR mit 0.2mm Nozzle möglich. Alles perfekt, gedruckt in Bambi ABS

@Maczak3DDesign

Print Profile

Recommended |0.2mm layer, 2 walls

it works!

(Edited)

@Micah3Ddesign

Boosted

Print Profile

Recommended |0.2mm layer, 2 walls

it printed amazing and my p1s printed all of them to where they could be freed. it didn’t detect the 0.05 but that’s because I’m using a .4 nozzle and the slicer doesn’t pick it up. thanks of this awesome test. I lik Ed how small it is so it prints fast and uses little material.

(Edited)