Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
1.2 h
1 plate
Boost
22
32
9
0
62
30
Released
Description
In the comments of my Low Poly Unicorn on Printables (also published here) I noticed that your kids love it. So I made a painted unicorn, which is primary for the girls and also a cute tiger for the boys.
You need 4 filaments to print/paint this 2D unicorn: black, red, yellow and white. You just have to swap the filament 3 times, so no AMS or MMU required.
I used Bambu Lab Filament, but other brands will work, too.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.6
- PLA BambuLab Basic Red Transmission Distance: 5
- PLA BambuLab Basic Yellow Transmission Distance: 6
- PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
- Start with Black
- At layer #9 (0.8mm) swap to Red
- At layer #14 (1.2mm) swap to Yellow
- At layer #16 (1.36mm) swap to White for the rest.
Generated using the HueForge software! See videos with instructions for filament swaps with Bambu Studio and PrusaSlicer …
… or try the included .3mf file!
I originally posted this model at Printables.
Comment & Rating (9)
All
Using the provided profile, this was my first HueForge print and it came out great!!
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Came out nice, my daughter loves it!
0
Reply
Came out nice!
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
tolle Voreinstellungen, super Ergebnis. schon Mega was man machen kann
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
daughter loves it. made it a fridge magnet
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld