In the comments of my Low Poly Unicorn on Printables (also published here) I noticed that your kids love it. So I made a painted unicorn, which is primary for the girls. So I needed to make something for the boys. Here it is.
You need 4 filaments to print/paint this 2D tiger: black, red, yellow and white. You just have to swap the filament 3 times, so no AMS or MMU required.
I used Bambu Lab Filament, but other brands will work, too.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Filaments Used:
Swap Instructions:
Generated using the HueForge software! See videos with instructions for filament swaps with Bambu Studio and PrusaSlicer …
… or try the included .3mf file!
I originally posted this model at Printables.