Makita SP6000J Track Saw wall mount

Wall mount for the Makita SP6000J track saw. Simply drop the saw in from the top, and the hooks will catch on the baseplate holding it firmly in place. It has 2 hooks that interact with the holes in the baseplate, and a lip on the bottom that ensures the saw doesn't slide out. There are 7 screw holes to secure it to the wall. I suggest using a flat piece of plywood to ensure the print isn't warped on uneven surfaces.

The file contains two models, they are equal except one is hollowed to reduce filament usage. I think the complete version is aesthetically better, but they both function the same way.

I printed it with Bambu basic PLA with 3 wall loops for added strength, which should be plenty for this saw.

It can be printed without supports in the default orientation - but I added a brim to ensure the thing doesn't fall over. I haven't tested it with bedslingers but you might want to rotate the model 90 degrees so the long edge is facing the front (and the entire thing doesn't act like a sail) and reduce the printing speed.