Lichtenstein Castle by MakerWorld

MakerWorld

Miniatures>Architecture

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

4 colors, 0.2mm layer, 2 walls, 25% infill

Designer

24.3 h

1 plate

4.5(46)

Boost

289

366

105

242

Released

Description

This is a well-designed 4-color Lichtenstein Castle model with rich details on exteriors. It can be 3D printed in multiple colors with Bambu Lab AMS.

Recommended filaments:

Bambu PLA-CF Burgundy Red(14200)

https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231516275

Bambu PLA-CF Lava Gray(14101)

https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231581811

Bambu PLA Basic Gray(10103)

https://store.bambulab.com/collections/pla-1/products/pla-basic-filament?variant=40909352960115

Bambu PLA Matte Dark Blue(11602)

https://store.bambulab.com/collections/pla-1/products/pla-matte-filament?variant=40789984968819

Hotend: 0.4mm Hardened Steel

Print time: 24.3h

castle

exclusive models

000008

Comment & Rating (105)

@jarvizar

Print Profile

4 colors, 0.2mm layer, 2 walls, 25% infill

Printed with dark gray PLA, marble PLA, purple PLA, and gold PLA silk. Turned out amazing on the first try! I even printed two to try and conserve waste and had zero issues with printing.

@alexkeidge95

What colours did you use

@jarvizar

Replying to @alexkeidge95 :

Elegoo Space Gray PLA for the rock Elegoo Purple PLA for the roofs CC3D Marble PLA for the walls CC3D Gold PLA Silk for the roof accents/decorations

(Edited)

@PredsFan

i got 3 to fit lol still printing ... 1d 20h 24m fingers crossed

(Edited)

@georgi

Great model. Love it. I made the draw bidge as well.

@SimplyLeviathan

Is the drawbridge accesible as a 3d print? My niece would love this addition to her castle!

@georgi

Replying to @SimplyLeviathan :

Hi there! I can send you the drawbridge or maybe to publish it here next week. Give me an email to send yoiu the stl files with compliments to your niece. :)

@georgi

Replying to @SimplyLeviathan :

I published it for your niece! Regards!

@RedNero

Print Profile

4 colors, 0.2mm layer, 2 walls, 25% infill

more stringing than expected but no Color bleeding. saw someone complaining about that but no issues here.

@whomst

Looks good, but that banding up the vertical areas tells me you should wipe down your carbon rod and brush/lube the vertical screws the bed moves along. Maybe it could help the stringing too! May as well tighten the belts while you're at it if you're feeling adventurous.

(Edited)

@RedNero

Replying to @whomst :

thank you. I really appreciate the advice, I’ll get on that right now.

(Edited)

@dabrown

Replying to @whomst :

This helps me learn, thanks.

@whomst

Print Profile

4 colors, 0.2mm layer, 2 walls, 25% infill

Incredible model and print profile. Perfect on the first try. Thank you Bambu!

@3D2Life

Print Profile

4 colors, 0.2mm layer, 2 walls, 25% infill

The whole family loves this! Took forever but so worth it! The rock is that PLA Marble Red Granite! So beautiful!

@CarGuy5811

Awesome

(Edited)

@3D2Life

Replying to @CarGuy5811 :

thanks!

(Edited)

@PredsFan

Print Profile

4 colors, 0.2mm layer, 2 walls, 25% infill

what a long print ...looks good tho..

@shar3d

that is amazing

@PredsFan

Replying to @shar3d :

thanks, I did edit it a little. added some color to one side that had none and added some letters.

@lion7718

Lost purge tower with 4 hours to go, A1 Mini pooped on it.

@bdpickett

Downloaded this on 11/1/23. Bambu Studio consistently reports errors in the file. I have downloaded it to a Mac and a Win11 computer, and BS says the files have errors in both. On the Win computer, selecting Fix Model takes a long time and it does finish, but when its done, all of the color mappings are gone.

@ethan.kuyunzhi

it may bee too high for the ai mini so probably scale it down

@precisionprint

Print Profile

4 colors, 0.2mm layer, 2 walls, 25% infill

this drawing is not even flat on the bottom causing horrible first edges. how is this a exclusive model when it loads with 572 discrepancies in the slicer. something is not right and I paid points for this?

@LeopardGeckoGuy

Print Profile

4 colors, 0.2mm layer, 2 walls, 25% infill

I’m going to try it again but some of the strings came off. Maybe I had it going to fast but it was only on sport.(edit) Second try worked perfectly! I had to use supports though. Was I supposed to?

(Edited)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (105)

License

Related Models

Old Castle Key

Hogwarts Castle Lamp Shade Sconce

Tiny Castle V2

Lichtenstein Castle - Drawbridge