Crocs Spike Jibbitz - Pointy Charms - New Designs!
Boost
105
156
25
Print Profile(2)
26 spikes - 0.16mm layer, 2 walls, 15% infill
Designer
16.9 h
9 plates
1 spike - 0.16mm layer, 2 walls, 15% infill
Designer
2.3 h
9 plates
Boost
105
156
25
1
219
171
Released
Description
All new designs! Three different heights, and three different bottom designs. Printed at 0.16mm layer height on my Bambu Lab P1P using PolyTerra Matte Charcoal Black: https://amzn.to/3F4Dv7d
Heights:
- 15mm
- 18mm
- 21mm
Bottom designs:
- 45 degree bottom with chamfers
- Flat bottom with chamfers
- Rounded bottom
A pretty simple design using Fusion 360. Video of how I designed it:
Comment & Rating (25)
All
Wife got tired of the puppies sitting on her feet. ;)
The designer has replied
1
Reply
Thanks for sharing!
0
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
Pointy as heck and they fit my cheapo bargain bin croc-offs just fine, might do another set and hit them with chrome!
The designer has replied
0
Reply
Looks great! Thanks for posting.
0
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
Printed in Bambu Lab Translucent pink PETG and they look great. Note that they're really pointy and I do not recommend stepping on them by accident because it will hurt! (ask me how I know :D)
0
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
nice easy print and sharp!
0
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
Worked pretty well had some bed adhesion problems so some of the spikes didn’t work but besides that everything works. Fit on Crocs nice too.
The designer has replied
1
Reply
Yup, I had to slow my first layer down to 10mm/s and have a PEO bed. The PEO bed is a must-have for printing many small items.
0
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
back of my leg was itchy so I cut myself a few times on accident...🤣
1
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
great
thanks
1
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
Great but very pointy
0
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
Printed well
0
Reply
Print Profile
26 spikes - 0.16mm layer, 2 walls, 15% infill
I need to print a second time first time failed.
0
Reply
License
This user content is licensed under a
Creative Commons Public Domain
© 2024 MakerWorld