BambuLabs X1C AMS Hub mount by Elmaker Design

Elmaker Design

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 5 walls, 45% infill

Designer

2.2 h

1 plate

4.0(2)

Official - use this 0.2mm layer, 2 walls, 15% infill - Use this one

Designer

1.4 h

1 plate

4.0(1)

0.2mm layer, 2 walls, 15% infill

1.2 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Side mount for AMS Hub on the Bambu X1 - was tired of having to move the printer to release ptfe tube.

Uses your existing cables with the hub.
Uses existing holes, fit with M3 bolts.

1h 18print time.

Feel free to adapt, just credit me, thanks.

Comment & Rating (7)

@Louisliu

The x1c cannot be used

The designer has replied

@ElmakerDesign

hi if you use the hole for the Spool holder (see image)- for the bottom bracket. I am using X1C and works perfect, let me know if it works for you?

@Louisliu

Replying to @ElmakerDesign :

No, he doesn't apply. My x1c will be blocked by the belt tensioner

@victorray

Replying to @Louisliu :

just add washer

@GadgetgurlVR

Print Profile

Official - use this 0.2mm layer, 2 walls, 15% infill - Use this one

Design needs adjusting....There's not enough room for the cable to feed through. I was able to make it work by gluing a few M6 nuts as spacers on the bottom and adding a X1C AMS Hub LITE Adapter (by Jaxel) on top

@parwrench

Print Profile

0.2mm layer, 5 walls, 45% infill

could use a little more room between the mounting and the hub. the cables are a little jammed into the side of the printer. if i have to unplug them it will have to be removed from the printer