Bambu Studio Settings:
The settings are just a recommendation, however you can print with the settings you are already used to using!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Blue
At layer #11 (0.96mm) swap to Marine Blue
At layer #15 (1.28mm) swap to Jade White for the rest.