HEX driver case by Aidyfid

Aidyfid

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 10% infill

Designer

8.5 h

4 plates

5.0(2)

0.2mm layer, 2 walls, 15% infill

6.8 h

2 plates

Open in Bambu Studio

Boost

Released

Description

The case is to store 4 Hex drivers from AliExpress. It requires 8x hex screws 3x25mm for assembley and a piece of foam to place in the lid.

https://www.aliexpress.com/item/1005005909561430.html?spm=a2g0o.productlist.main.101.2a3eP8ZkP8ZkKC&algo_pvid=594b4930-a232-437e-9984-3b6e98e4c6db&algo_exp_id=594b4930-a232-437e-9984-3b6e98e4c6db-50&pdp_npi=4%40dis%21GBP%214.80%210.40%21%21%2142.68%213.59%21%40211b612517057718146266172e94f9%2112000034804472547%21sea%21UK%210%21AB&curPageLogUid=0HMn6yXsJZsU&utparam-url=scene%3Asearch%7Cquery_from%3A

hex driver

screwdriver box

Comment & Rating (3)

@andrej86

Print Profile

0.2mm layer, 4 walls, 10% infill

@Molback

How did the screws go in on this the base has oval holes not rounds slots. The Lid has rounds holes but I don't see how to get the screws in without drilling. This can be observed on both profiles loaded.

(Edited)